Compass calibration

From Windbird wiki
Jump to navigation Jump to search
VisualWikitext
(Undo revision 175 by 86.198.133.52 (talk))
Tag: Undo
(Undo revision 174 by 86.198.133.52 (talk))
Tag: Undo
Line 1: Line 1:
Contrairement aux autres girouettes, Windbird n'a pas besoin d'être orientée par rapport au nord. Il comprend une boussole électronique. Cependant, '''il est absolument nécessaire de calibrer la boussole de Windbird .''' Le champ magnétique terrestre varie à chaque endroit. C'est pourquoi '''un calibrage doit être effectué sur chaque site d'installation, juste avant de monter Windbird sur son mât.''' '''Si vous connaissiez le dispositif Pioupiou, oubliez tout.''' Le calibrage du Windbird la procédure est différente. <big>'''Comment calibrer ?'''</big> * Assurez-vous que le Windbird est déjà allumé. * Continuez à appuyer sur le bouton pendant environ 10 secondes, jusqu'à ce que la LED clignote. Tout d'abord, nous allons calibrer les 2 positions verticales : * Tenir le Windbird à la verticale. Faites pivoter le Windbird autour de son axe, pendant environ un tour. * Tenez-le à l'envers. Faites pivoter le Windbird (toujours un tour). Ensuite, nous calibrerons les 4 positions horizontales : * Tenez-le horizontal devant vous. Faites pivoter le Windbird . * Tournez votre corps à 90° sur votre droite. Faites pivoter le Windbird . * Tournez votre corps à 90° sur votre droite. Faites pivoter le Windbird . * Tournez votre corps à 90° sur votre droite. Faites pivoter le Windbird . Vous avez bouclé la boucle. Vérifiez maintenant la LED. S'il est toujours allumé, vous avez besoin de plus d'échantillons. Répétez les mouvements jusqu'à ce que la LED s'efface. Une fois le calibrage terminé, la LED s'éteindra pendant 3 secondes puis le Windbird redémarrera. '''Mieux qu'un long texte, regardez la vidéo de démonstration :''' [[File:Scrrenshot video.png|link=https:// windbird .com/calibration-video]] <span class="wb_btn">[[ Windbird _Fox/Turn_it_on_and_off|⬅️ Précédent ]]</span> <span class="wb_btn">[[ Windbird _Fox/Consultez les rapports|Suivant ➡️]]</span>
Unlike other wind vanes, Windbird does not need to be oriented with respect to north. It includes an electronic compass.
 
 
However, '''it is absolutely necessary to calibrate Windbird's compass.'''
 
The earth's magnetic field varies at each location. This is why '''calibration must be carried out at each installation site, just before mounting Windbird on its mast.'''
 
 
'''If you were familiar with the Pioupiou device, forget all about it.''' The Windbird calibration procedure is different.
 
 
<big>'''How to calibrate?'''</big>
 
* Make sure the Windbird is already switched on.
* Keep pressing the button for ~10 seconds, until the led blinks.
 
First, we will calibrate the 2 vertical positions :
 
* Hold the Windbird upright. Rotate the Windbird around its axis, for about one revolution.
* Hold it upside down. Rotate the Windbird (always one revolution).
 
Then, we will calibrate the 4 horizontal positions :
 
* Hold it horizontal in front of you. Rotate the Windbird.
* Turn your body 45° on your right. Rotate the Windbird.
* Turn your body 45° on your right. Rotate the Windbird.
* Turn your body 45° on your right. Rotate the Windbird.
 
You've come full circle.
 
Now check the LED. If it is still lit, you need more samples. Repeat the moves until the LED clears itself.
 
Once the calibration is complete, the LED will turn off for 3 seconds then the Windbird will reboot.
 
'''Better than a long text, watch the video demonstration:'''
 
[[File:Scrrenshot video.png|link=https://windbird.com/calibration-video]]
 
 
 
<span class="wb_btn">[[Windbird_Fox/Turn_it_on_and_off|⬅️ Previous]]</span> <span class="wb_btn">[[Windbird_Fox/Check the reports|Next ➡️]]</span>

Revision as of 04:24, 10 February 2024

Unlike other wind vanes, Windbird does not need to be oriented with respect to north. It includes an electronic compass.


However, it is absolutely necessary to calibrate Windbird's compass.

The earth's magnetic field varies at each location. This is why calibration must be carried out at each installation site, just before mounting Windbird on its mast.


If you were familiar with the Pioupiou device, forget all about it. The Windbird calibration procedure is different.


How to calibrate?

  • Make sure the Windbird is already switched on.
  • Keep pressing the button for ~10 seconds, until the led blinks.

First, we will calibrate the 2 vertical positions :

  • Hold the Windbird upright. Rotate the Windbird around its axis, for about one revolution.
  • Hold it upside down. Rotate the Windbird (always one revolution).

Then, we will calibrate the 4 horizontal positions :

  • Hold it horizontal in front of you. Rotate the Windbird.
  • Turn your body 45° on your right. Rotate the Windbird.
  • Turn your body 45° on your right. Rotate the Windbird.
  • Turn your body 45° on your right. Rotate the Windbird.

You've come full circle.

Now check the LED. If it is still lit, you need more samples. Repeat the moves until the LED clears itself.

Once the calibration is complete, the LED will turn off for 3 seconds then the Windbird will reboot.

Better than a long text, watch the video demonstration:


⬅️ Previous Next ➡️

Retrieved from "https://windbird.com/w/index.php?title=Windbird_Fox/Compass_calibration&oldid=178"