Turn it on and off

Revision as of 23:52, 7 October 2023

Power On

Briefly press the button using a stick or a pen.
Watch the led reaction.

If steady (~10s):

The device is turning on and sending an initial message.

It will then perform a GPS location for approximately 45 seconds.

The first measurements will be received around 10 minutes later.

If slow continuous blinking:

Capacitor charging is in progress, wait for a few minutes.

Once the led stops blinking, the startup continues.

Power Off

Press the button again. The LED blinks rapidly 5 times then fades.

@@ Line 7: / Line 7: @@
-'''If slow continuous blinking:'''
-video
+'''If steady (~10s):'''
+The device is turning on and sending an initial message.
+It will then perform a GPS location for approximately 45 seconds.
+The first measurements will be received around 10 minutes later.
+{{#ev:youtube|G4Q_-JK-y8g}}
-Capacitor charging is in progress, wait for a few minutes.
-'''If steady (~10s):'''
-video
+'''If slow continuous blinking:'''
-The device is turning on and sending an initial message.
+Capacitor charging is in progress, wait for a few minutes.
-It will then perform a GPS location for approximately 45 seconds.
+Once the led stops blinking, the startup continues.
-The first measurements will be received around 10 minutes later.
+{{#ev:youtube|ASRMdQrbvfo}}
 <big>'''Power Off'''</big>
-video
 Press the button again.
 The LED blinks rapidly 5 times then fades.
+{{#ev:youtube|t5HZdMiLzIE}}
 <span class="wb_btn">[[Windbird_Fox/The_unique_number|⬅️ Previous]]</span> <span class="wb_btn">[[Windbird_Fox/Compass calibration|Next ➡️]]</span>