Set up your Windbird
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
I will guide you for the following steps: | I will guide you for the following steps: | ||
* Meet your Windbird | |||
* Turn it on and off | |||
* Calibrate the compass | |||
* Check the network coverage | |||
* Find a good installation spot | |||
* Install the Windbird on it's pole | |||
* Locate it on the map and edit it's description | |||
Revision as of 17:21, 5 October 2023
Thank you for purchasing a Windbird!
We will set it up together.
I will guide you for the following steps:
- Meet your Windbird
- Turn it on and off
- Calibrate the compass
- Check the network coverage
- Find a good installation spot
- Install the Windbird on it's pole
- Locate it on the map and edit it's description
THE COMPASS MUST BE CALIBRATED BEFORE YOU INSTALL THE WINDBIRD ON IT'S MAST.
(If you had a Pioupiou before, forget all about it. The calibration procedure is different).
If you have any doubt or if you need any help, send an email to contact@windbird.com
Click on "Next" to continue.